Basics of Troubleshooting in Plastics Processing An Introductory Practical Guide 1st Edition by Muralisrinivasan Natamai Subramanian ISBN 0470626062 9780470626061

Basics of Troubleshooting in Plastics Processing An Introductory Practical Guide 1st Edition by Muralisrinivasan Natamai Subramanian – Ebook PDF Instant Download/Delivery: 0470626062, 9780470626061
Full download Basics of Troubleshooting in Plastics Processing An Introductory Practical Guide 1st Edition after payment

Product details:

ISBN 10: 0470626062 
ISBN 13: 9780470626061
Author: Muralisrinivasan Natamai Subramanian

The Basics of Troubleshooting in Plastics Processing is a condensed practical guide that gives the reader a broad introduction to properties of thermoplastics plastics, additives, the major processes (extrusion, injection molding, rotational molding, blow molding, and thermoforming), as well as troubleshooting.   The main goal is to provide the plastics processor with an improved understanding of the basics by explaining the science behind the technology. Machine details are minimized as the emphasis is on processing problems and the defects in an effort to focus on basic root causes to problems and how to solve them.

The book’s framework is troubleshooting in plastics processing because of the importance it has to the eventual production of high quality end products. Each chapter contains both practical and detailed technical information.

This basic guide provides state-of-the-art information on:

• Processing problems and defects during manufacturing
• Plastics materials, their properties and characterization
• The plastics processing techniques
• Plastics additives 
• Troubleshooting of the 5 main plastics processes
• References for further reading

Basics of Troubleshooting in Plastics Processing An Introductory Practical Guide 1st Table of contents:

• 1. Introduction

  • 1.1 Market Trends
  • 1.2 Importance of Plastics
    • 1.2.1 Plastics vs Metal
    • 1.2.2 Plastics vs Paper and Paper Board
  • 1.3 Plastics Processing
  • 1.4 Fundamentals
  • References

• 2. Plastics Materials

  • 2.1 Properties and Processing
    • 2.1.1 Molecular Weight
    • 2.1.2 Molecular Weight Distribution (MWD)
    • 2.1.3 Flow Properties
    • 2.1.4 Degree of Crystallinity
    • 2.1.5 Surface Quality
    • 2.1.6 Viscosity
  • 2.2 Polyethylene
  • 2.3 Polypropylene (PP)
  • 2.4 Polystyrene
  • 2.5 Polyvinylchloride (PVC)
  • 2.6 Engineering Plastics
    • 2.6.1 Acrylonitrile Butadiene Styrene (ABS)
    • 2.6.2 Polymethylmethacrylate (PMMA)
    • 2.6.3 Nylon
    • 2.6.4 Polyethyleneterephthalate (PET)
    • 2.6.5 Polycarbonate (PC)
    • 2.6.6 Polyether Ether Ketone (PEEK)
    • 2.6.7 Polytetrafluoroethylene (PTFE)
    • 2.6.8 Polyacetal (POM)
    • 2.6.9 Polyvinylidene Fluoride (PVDF)
    • 2.6.10 Polyphenylene Sulfide (PPS)
  • 2.7 Advantages
  • 2.8 Fundamentals
  • References

• 3. Plastics Additives

  • 3.1 Antioxidants
  • 3.2 Anti-block Agents
  • 3.3 Antistatic Agent
  • 3.4 Clarifying Agents
  • 3.5 Slip Additives
  • 3.6 Processing Aids
  • 3.7 Antifogging Agents
  • 3.8 Antiblocking Agents
  • 3.9 Heat Stabilizers
  • 3.10 Lubricants
  • 3.11 Plasticizers
  • 3.12 Coupling Agents or Surface Modifiers
  • 3.13 Release Agents
  • 3.14 Flame Retardants
  • 3.15 Pigments
  • 3.16 Light Stabilizers
  • 3.17 Impact Modifiers
  • 3.18 Blowing Agents
  • 3.19 Nucleating Agents
  • 3.20 Biocides
  • 3.21 Fillers
  • References

• 4. Plastics Processing

  • 4.1 Focus on Plastics Processing
  • 4.2 Injection Molding
    • 4.2.1 Injection Molding Machine
      • 4.2.1.1 Ram Injection Molding Machine
      • 4.2.1.2 Screw Injection Molding Machine
    • 4.2.2 Injection Unit
      • 4.2.2.1 Barrel
      • 4.2.2.2 Screw
      • 4.2.2.3 Clamping Unit
      • 4.2.2.4 Hydraulic Unit
    • 4.2.3 Mold
      • 4.2.3.1 Runner
      • 4.2.3.2 Gate
      • 4.2.3.3 Sprue
    • 4.2.4 Process Parameters
    • 4.2.5 Troubleshooting
  • 4.3 Extrusion
    • 4.3.1 Extruder
      • 4.3.1.1 Single-Screw Extruder
      • 4.3.1.2 Twin-Screw Extruder
    • 4.3.2 Die
    • 4.3.3 Calibration and Cooling
    • 4.3.4 Troubleshooting
  • 4.4 Blow Molding
    • 4.4.1 Extrusion Blow Molding
    • 4.4.2 Injection Blow Molding
    • 4.4.3 Stretch Blow Molding
    • 4.4.4 Troubleshooting
  • 4.5 Thermoforming
    • 4.5.1 Vacuum Forming
    • 4.5.2 Pressure Forming
    • 4.5.3 Troubleshooting
  • 4.6 Rotational Molding
    • 4.6.1 Process Overview
    • 4.6.2 Troubleshooting
  • References

• 5. Troubleshooting in Plastics Processing

  • 5.1 General Troubleshooting Approach
  • 5.2 Common Processing Problems and Solutions
  • 5.3 Troubleshooting Flowcharts
  • References

People also search for Basics of Troubleshooting in Plastics Processing An Introductory Practical Guide 1st:

    
plastics troubleshooting guide
    
the basics of troubleshooting in plastics processing
    
handbook of troubleshooting plastics processes a practical guide
    
basic troubleshooting technique
    
basic troubleshooting tips

Tags:

Muralisrinivasan Natamai Subramanian,Troubleshooting,Introductory